HEPA Wall-mount Air Purifier | WM2-RC2-HEPA |

HEPA Wall-mount Air Purifier | WM2-RC2-HEPA |

The WM2-RC2-HEPA is a HEPA wall-mount air purifier/ smoke guard. This unit can be mounted inside a wall and mounted flush to the wall allows you to conserve space.  It is a perfect solution for smoke, dirt and odor removal for home, offices, schools, lobbies etc.

HEPA Wall-mount Air Purifier | WM2-RC2-HEPA | is a 900 CFM (Cubic Feet per Minute) which means it can removes dirt, smoke, odor and gases etc., efficiently from medium sized spaces. It operates at 120 volt x 2.6 amps. It comes with a variable speed controller which can either be mounted in the unit or any other connection point (wall-switch) at your desired location.

The purifier has three filters: pre-filter, True HEPA filter and 2 chamber activated charcoal filter.  

• Pre-Filter

The pre-filter is a MERV-2 filter, is washable and will last more than a year. This filter removes large-sized dirt particles from the air and ensures the final released air will be fresh and clean

• True HEPA Filter

True HEPA Filter removes maximum impurity from the air in a single pass. It is designed to trap up to 99.97% of dirt and smoke particles, small pathogens and allergens, to a size of 0.3 micron. HEPA filters are easily removable and should be replaced every 6-12 months depending upon the level of indoor air pollution.

• 2 Chamber Activated Charcoal Filter

This is the final filter in WM2-RC2-HEPA is a wall-mount air purifier. It contains 2.5 pound of activated charcoal. It helps in the absorption/removal of gases and odors.

Installation Kit

The WM2-RC2-HEPA is a HEPA wall-mount air purifier is fabricated to be installed on the wall stud sets with 24 inch, at the center. A frame can be customized to mount the purifier on the wall with 16 inch stud, at the center. The air cleaning unit is only 11 inch in depth and extends to 6.5 inch of width. It is built with attractive vinyl coated steel comes with a trim-kit and to give purifier an aesthetically appealing look.

Mounting Options

The WM2-RC2-HEPA is a HEPA wall-mount air purifier is designed to be installed on any solid-wall surface. If wall space is an issue, this air cleaner can also be mounted on a ceiling. It is built with galvanized steel for durability and wear resistance. When installed this model weighs 70 lbs.

Noise Levels

No one wants to be disturbed by annoying noise of air-purifier while taking a nap. Noise often comes from the fan operation. Fortunately, WM2-RC2-HEPA wall-mount air purifier creates less noise 40-69 dbA at 15 ft.

Specs

<table height="381"

Capacity

900 CFM

Filter 1

MERV 2 Pre Filter

Filter 2

20 x 16 x 4.5 Tue HEPA 99.97% efficient 

Filter 3

2 Chamber Carbon Filter 

Unit Size

33″ x 24″  x 11″

Unit Weight 

70 Lbs.

Power

120 volt @ 2.6 Amp

Sound at 15 feet

40-69 d(b)A 

Warranty

7 year Limited

note

Does not meet California air cleaner regulation requirements